Month: May 2016

10/05/16 – Proposed Launch Date

Following discussions with the Dep Head (Mr Page), we have set a provisional launch date of the 22 June 2016. This will coincide with the schools sports day, the location of which could prove a suitable launch site. A view from Google Earth shows that there are no immediate obstructions so a RECCE will follow shortly to confirm the suitability.

The site is directly adjacent to two schools who hopefully will be onside with allowing us to ‘borrow’ their WiFi which is needed for communications. I also seem to recall that there are some suitable buildings in which we could establish ‘Mission Control’ and if we launch early enough in the morning the recovery may be completed before the sports day ends?

All of the above is clearly subject to agreements and of course weather!!Screen Shot 2016-05-10 at 20.52.32Proposed launch site middle of athletics track, or adjacent field.

Screen Shot 2016-05-10 at 21.09.47

Predicted flight scenario if launched 12/ May/2016, flight time is 2hr 25mins, landing area NE of Holsworthy.

 

Advertisements

05/05/16 – Club Update

Ok so yesterday was the second club gathering of the summer term and we welcomed another new member from Y5 (the club is proving very popular).

Announcment

First an announcement – I was able to tell the club that we had secured some more funding, courtesy of the Vivian Moon Braunton Community Trust Fund, who have very kindly granted us £200 towards our project. We are now well on the way to our target.

Procurement

Following the successful fund raising last term we have started to gather some of the necessary hardware, starting with some of the communications gear, which includes the following:

  • Pi In The Sky Board (PITS) (Contains the GPS and Radio Transmitter for the payload)
  • 2 x Ultra High Frequency (UHF) whip antennas (For testing)
  • 1 x Stubby UHF Antenna
  • Software Defined Radio (SDR) USB Dongle (receives the signal from the payload at mission control)
  • Pi Zero (On loan due to short supply of A+ and B+ Raspberry Pis)

Demonstration and Research

Following a quick demonstration of how to connect, and use the radio transmitter and receiver the club member were given another research task. The task was to answer some more HAB related questions.

Radio Communication 

To receive and decode the signal  the laptop uses two pieces of software ‘gqrx’ and dl-fldigi’, these are both freely available and work on both Mac OS X and Windows as well as some other OS.

IMG_1009

(Pic showing R820T2 SDR Dongle and Macbook running gqrx and dl-fldigi)

First Field Test

Once everyone had completed the research task we set off on a field test (school playground and school field). Two of the club members took the test payload containing the Pi Zero and PITS board up to the end of the school field and the remainder monitored the laptop which was connected to the SDR dongle and UHF antenna.

Once outside whilst we were able to pick up and decode the signal from the payload, we were unable to transmit this via the Internet to HabHub. This may be due to the proxy setup and filter on the schools network, we can access HabHub but it may be possible that we cannot send information to it? This issue will need to be investigated and resolved but this afternoon was a partial success. As usual as a reward for their input during the club the last 15 minutes of the club night was spent playing video games!

(Pic showing payload test team and temporary payload with GPS and UHF antenna, we discussed that the payload definitely needs decorating, even if it is just for trials!!)

Next week we will carry out another test but this time we will hope to have a Web Camera setup on the payload to take pictures and send these to the receiver for viewing.

30/04/16 – Club Update

Thursday was the first meeting of the club this term, as this is a new term as well as some of the original members we have a few new ones; Leo, Eve, Johna and Amelie.

In order to revise what was covered last term and to enhance an understanding of the project I set the club members a task involving a series of questions and tasks. The question covered things like what key electronics will be in the payload to performing a flight prediction using the habhub predictor here. The new members performed extremely well considering much of the terminology was new to them.

The questions / tasks were as follows:

  1. What does HAB stand for?
  2. Visit UKHAS.org.co.uk
    1. What does UKHAS stand for?
    2. In the beginners guide (safety) why don’t we use Hydrogen?
  3. Using tracker at HabHub.org what balloon call signs are currently in the air?
  4. Using the predictor on the same site, if we launched from here today were would our balloon land?
  5. Who is Dave Akerman and why is he relevant?
  6. Have a look at our web site:
    1. How high are we hoping to reach with our flight?
    2. What 3 key electronic items do we need in the payload?
    3. How will we stop our balloon from falling to fast?
    4. How will we find our balloon?

Here the answers from two of the club members working together:

  1. High Altitude Ballooning

2a. UK High altitude Society

2b, Because it is explosive

3. KD0ZTV-4,W7QO

4. Yeovil

5. He fly’s balloons with raspberry pi

6a.100,000 feet

6b.rasberry pi computer, parachute, raspberry pi camera

7. Parachute

8. Tracker